Aluminium Alloy Specification Table For BS1490 LM25

Aluminium Alloy Specification BS1490 : Chemical Analysis

Grade Nominal Chemical Analysis
Specificification Process Cu Mg Mn Si Zn Fe Al Ti Ni Cr Typical Applications
A356.0 T6 IC/PDC 0.2 0.2-0.45 0.35 6.5-7.5 0.1 0.2 Rem 0.2 # # Application A356 T6
ADC12 PDC 0.2 0.1 0.5 10.5-12 3 1.3 Rem # 0.5 # Application ADC12
LM25TF IC/SC 0.2 0.2-0.6 0.3 6.5-7.5 0.1 0.5 Rem 0.2 0.1 # Application LM25
7075 F 1.2-2 2.1-2.9 0.3 0.4 5.1-6.1 0.5 Rem 0.2 # 0.18-0.28 Application 7075
6061 T6 F 0.15-0.4 0.8-1.2 0.15 0.4-0.8 0.25 0.7 Rem 0.15 # 0.04-0.35 Application 6061
6082 T6 F 0.1 0.6-1.2 0.4-1 0.7-1.3 0.2 0.5 Rem 0.1 # 0.25 Application 6082
Specificification Process Cu Mg Mn Si Zn Fe Al Ti Ni Cr Typical Applications
Grade Nominal Chemical Analysis
 

Aluminium Alloy Specification BS4190 :  Mechanical Properties

Grade Mechanical Properties
Specificification Process UTS (Mpa) 0.2% PS (Mpa) Elongation (%) Typical Hardness (HB)
A356.0 T6 IC/PDC 230 185 2 75
ADC12 PDC 331 165 2.5 85
LM25TF IC/SC 230-280 200-250 1
7075 F 572 503 11 150
6061 T6 F 294 245 10 95
6082 T6 F 310 270 8 95
Specificification Process UTS (Mpa) 0.2% PS (Mpa) Elongation (%) Typical Hardness (HB)
Grade Mechanical Properties
 

Aluminium Alloy Specification BS4190 :  Comparable Specifications

Grade Comparable/Similar Specifications
Specificification Process BS1490 ISO UNS Similar Grades
A356.0 T6 IC/PDC A13560 LM25TF
ADC12 PDC LM2 Al-Si10Cu2Fe A384.0
LM25TF IC/SC Al-Si7Mg
7075 F # AlZn5.5MgCu A9705
6061 T6 F # AlMg1SiCu A96061
6082 T6 F # AlSiMgMn
Specificification Process BS1490 ISO UNS Similar Grades
Grade Comparable/Similar Specifications